USENET Premium Content
 USENET Archives
  
Newsgroups: comp.sys.sequent
Path: sparky!uunet!munnari.oz.au!metro!basser.cs.su.oz.au!tmx!coulomb!parson
From: par...@coulomb.pcc.oz.au (Brenda Parsons)
Subject: Dynix/ptx 1.4.0 in the UK
Message-ID: <1992Dec8.003735.4796@coulomb.pcc.oz.au>
Organization: Prospect Electricity
X-Newsreader: TIN [version 1.1 PL6]
Date: Tue, 8 Dec 92 00:37:35 GMT
Lines: 12

One of our 3rd party Software vendors  insists that 
Dynix/ptx 1.4.0 isn't available in the UK, is
this true?

Is there a great difference in the release schedule
of products for different countries or is everything
released globally at the same time?
-- 
% Brenda Parsons                  
% Currently at Prospect Electricity
% 10 Smith Street, Parramatta 2150, Australia
% +61 2 635 0300              e-mail:   par...@coulomb.pcc.oz.au  

Newsgroups: comp.sys.sequent
Path: sparky!uunet!usc!sol.ctr.columbia.edu!emory!swrinde!elroy.jpl.nasa.gov!wvus!pete
From: p...@wvus.org (Pete Gregory)
Subject: what is PTX 1.4 ?
Organization: World Vision U.S.
Date: Mon, 07 Dec 92 17:37:30 GMT
Message-ID: <1992Dec07.173730.15969@wvus.org>
Lines: 13

Hi... we're running five Unisys 6000/70/80's here on PTX 1.3.1.  I see
a lot of news postings from people running PTX 1.4, and wonder:

* whose release is it?  Sequent?  Unisys?  both?

* what hardware platforms does it run on?

Thanks!
-- 

Pete Gregory       |  Internet: p...@wvus.org
UNIX SA            |  Bangpath: ames!elroy!wvus!pete
World Vision U.S.  |  Slowpath: 919 W. Huntington Dr., Monrovia, CA 91016

Newsgroups: comp.sys.sequent
Path: sparky!uunet!sequent!muncher.sequent.com!holzman
From: holz...@sequent.com (Alan Holzman)
Subject: Re: Dynix/ptx 1.4.0 in the UK
Message-ID: <1992Dec8.053533.2911@sequent.com>
Sender: use...@sequent.com (usenet )
Nntp-Posting-Host: time1.sequent.com
Organization: Sequent Computer Systems, Inc.
References: <1992Dec8.003735.4796@coulomb.pcc.oz.au>
Distribution: sqnt
Date: Tue, 8 Dec 92 05:35:33 GMT
Lines: 19

par...@coulomb.pcc.oz.au (Brenda Parsons) writes:

>One of our 3rd party Software vendors  insists that 
>Dynix/ptx 1.4.0 isn't available in the UK, is
>this true?
>Is there a great difference in the release schedule
>of products for different countries or is everything

	DYNIX/ptx 1.4 is certainly available in the UK and has been for
at least 6 months. There is occasionally a lag of a few weeks at most
to roll-out new releases everywhere in the world ... mostly because
we like to make sure that all local support center folks are trained
and knowledgeable about a new release before we "spring it" on them ... ;*)

-- 
Alan Holzman					Phone =	(503) 578-5184
Operating Systems Product Line Manager		FAX =   (503) 578-9890 
Sequent Computer Systems Inc.   MS=DES2-365	Internet = holz...@sequent.com
15450 SW Koll Pkwy,  Beaverton, OR. 97006       UUCP = ...!sequent!holzman 

Newsgroups: comp.sys.sequent
Path: sparky!uunet!sequent!muncher.sequent.com!holzman
From: holz...@sequent.com (Alan Holzman)
Subject: Re: what is PTX 1.4 ?
Message-ID: <1992Dec8.053047.2757@sequent.com>
Sender: use...@sequent.com (usenet )
Nntp-Posting-Host: time1.sequent.com
Organization: Sequent Computer Systems, Inc.
References: <1992Dec07.173730.15969@wvus.org>
Distribution: sqnt
Date: Tue, 8 Dec 92 05:30:47 GMT
Lines: 21

p...@wvus.org (Pete Gregory) writes:
>Hi... we're running five Unisys 6000/70/80's here on PTX 1.3.1.  I see
>a lot of news postings from people running PTX 1.4, and wonder:
>* whose release is it?  Sequent?  Unisys?  both?
>* what hardware platforms does it run on?

	DYNIX/ptx 1.4 is a Sequent-only release running on Sequent
Symmetry 2000 systems. The "PTX 1.3.1" which Pete mentions is a
Unisys version of DYNIX/ptx 1.3 from Sequent with Unisys drivers added
to it to support Unisys specific peripherals and comms products. The
Unisys version of PTX 1.3.1 also has support for a few of the new
peripherals which Sequent added in DYNIX/ptx 1.4 (FDDI & 3480 tape devices).

	The most current version of DYNIX/ptx is 2.0 which has just begun
to ship in the last 2 weeks ...
 
-- 
Alan Holzman					Phone =	(503) 578-5184
Operating Systems Product Line Manager		FAX =   (503) 578-9890 
Sequent Computer Systems Inc.   MS=DES2-365	Internet = holz...@sequent.com
15450 SW Koll Pkwy,  Beaverton, OR. 97006       UUCP = ...!sequent!holzman 

Path: sparky!uunet!uswnvg!nv77.uswnvg.com!rfadler
From: rfad...@uswnvg.com (Rick Fadler (206) 450-8575)
Newsgroups: comp.sys.sequent
Subject: Re: Dynix/ptx 1.4.0 in the UK
Message-ID: <2983@uswnvg.uswnvg.com>
Date: 10 Dec 92 20:53:54 GMT
References: <1992Dec8.003735.4796@coulomb.pcc.oz.au>
Sender: n...@uswnvg.uswnvg.com
Organization: U S WEST NewVector Group, Inc.
Lines: 10
X-Newsreader: Tin 1.1 PL5

Brenda Parsons (par...@coulomb.pcc.oz.au) wrote:
: One of our 3rd party Software vendors  insists that 
: Dynix/ptx 1.4.0 isn't available in the UK, is
: this true?

We have a customer in the UK that purchased a S2000/250 in June of 92'. It
was delivered with the ptx 1.4 tapes. They purchased the system from Sequent
in the UK so I would assume it's been available there since at least June.

Rick Fadler

Path: gmd.de!urmel.informatik.rwth-aachen.de!news.rhrz.uni-bonn.de!mpifr-bonn.mpg.de!uniol!math.fu-berlin.de!netmbx.de!Germany.EU.net!mcsun!howland.reston.ans.net!cs.utexas.edu!swrinde!elroy.jpl.nasa.gov!nntp-server.caltech.edu!dbikle
From: dbi...@cco.caltech.edu (Daniel B. Bikle)
Newsgroups: comp.sys.sequent
Subject: My version of tcp/ip?
Date: 11 Nov 1993 20:11:44 GMT
Organization: California Institute of Technology, Pasadena
Lines: 30
Message-ID: <2bu6a0$3p9@gap.cco.caltech.edu>
NNTP-Posting-Host: alumni.caltech.edu

Hi There,

I'm installing some third party software on my sequent.

The install script says the following:

	"Make sure your TCP/IP software version is 2.2.2 or higher."

How do I check?

Info about my sequent:

UNIX System V Release 3.2.0 i386
morph
Copyright (c) 1984 AT&T
All Rights Reserved
Last login successfully completed at Thu Nov 11 11:29:27 1993

DYNIX/ptx(R) V2.1.0 #1 (): Wed Sep 22 15:09:27 EDT 1993
Copyright 1988 Sequent Computer Systems, Inc.

-Dan
-----------------------------
Daniel B. Bikle
Independent Oracle Consultant
dbi...@alumni.caltech.edu
415/854-9542
P.O. BOX 'D'
MENLO PARK CA 94026
-----------------------------